You can do any task faster and more easily with complete tools. This is why you can find tool kits in almost every home. Different instruments such as screwdrivers, tape measure, hammer, duct tape, pliers, flashlight, and even a handsaw can mean a difference in home repairs. You may not use them often, but it pays to have a special box at home with complete tools you can use.
The same need for complete tools is true for welders. With the variety of tasks at hand, tradespeople can only hope for a one-tool-does-all kind of machine. While this kind of technology is still playing in the mind of inventors, you can rely on a Victor cutting torch kit to be your one-stop-shop box for your cutting needs.
If you are looking for the best Victor cutting torch kit, we listed here ten choices for you. When you look at the boxes, you may ask what the kits' differences are. Sometimes, each kit only differs in the Victor cutting torch head or other specific accessories. Let’s see what makes one kit different from or similar to the other in terms of kit inclusion, safety, and price.
Victor Cutting Torch: Journeyman 450
Kit Inclusion
The Journeyman 450 is an oxyacetylene type of torch. The acetylene fuel makes this tool capable of burning up to 6,332°F.
This Victor cutting torch set is complete with a 2W welding nozzle, CA2460 cutting attachment, and two 1-101 Victor cutting torch tips. These parts will allow you to cut, weld, and heat materials in your workroom.
Oxyacetylene torches’ primary consideration for safety is properly turning them on and off according to the steps. To turn the torch on, open the acetylene valve first, and then the oxygen follows. Then, to turn it off, the oxygen regulator should be turned off first, and then the acetylene. Noncompliance with these steps can mean burn or explosion accidents in the workroom.
Safety
For safety, the Journeyman 450 315FC torch handle is equipped with flashback arrestors and reverse flow check valves so that the scenario above will not occur. The SR450D-540 oxygen and SR460A-510 acetylene regulators give you a view of how much fuel is coming out of your torch.
Price
Journeyman 450’s price depends on where you will purchase it, but the range is from USD 519 to USD 905.
Journeyman 300
Kit Inclusion
The Journeyman 300 is another oxyacetylene fueled torch in which gas flows securely through the ESS4-15-300 gas and ESS4-125-540 oxygen regulators.
With the proper use of welding nozzles, the torch can weld up to ½ inch. A 1-1-101 cutting tip can cut at a maximum of ¾ inch. The Journeyman 300 can also assist you with your heating needs with an included size 8 MFA heating nozzle.
The kit also has a 20-foot by ¼-inch T-grade hose and welding goggles.
Safety
It is built with an H315FC torch handle with flashback arrestors and reverse flow check valves that ensure user safety. This design is Victor technology. It still pays to follow the proper way of turning the torches on and off.
Price
The Journeyman 300’s price can be USD 1,539 or less.
Journeyman Edge 2.0 and Journeyman II Edge 2.0
Kit Inclusion
When you look for a Victor cutting torch for sale and see these two, you would probably ask what the difference is.
Journeyman Edge 2.0 has a heating nozzle with a heating capacity of 1,118,000 BTUs/hour; the Journeyman II Edge 2.0 does not. On the other hand, the Journeyman II Edge 2.0 has a welding nozzle that can weld up to 3 inches; the Journeyman Edge 2.0 does not have this.
While you can use both in cutting, heating, and welding, you need to consider whether you’ll have more heating or welding tasks when deciding which to buy.
Both have Victor cutting torch tips and a CA2460 cutting attachment that can cut up to 8 inches. Other kit inclusions are goggles, striker, and welding tip cleaner.
Safety
It also has the safety signature of a WH315FC handle that has built-in flashback arrestors and reverse flow check valves. The ESS42 Series regulators used by these kits even make the Victor gas cutting torch safer.
Price
The Victor Journeyman Edge 2.0 costs around USD 500, while the Victor Journeyman II Edge 2.0 costs around USD 450.
Victor Cutting Torch Set: Performer Edge 2.0
The Performer Edge 2.0 can satisfy your welding needs through its W1 welding nozzle that can weld up to ¼ inch. You can use the 4-MFA-1 nozzle for your heating needs, and the 0-3-101 cutting tip can help you weld up to 6-inch materials.
Your work will be made easier because of the oxyacetylene fuel used by the Performer Edge 2.0.
Safety
The quality of your work is safe thanks to the CA1350 cutting attachment, Edge 2.0 regulators, and the WH100FC torch handle that has identical check valves and flashback arrestors as other Victor cutting torches for sale.
Price
You can buy the Performer Edge 2.0 for USD 350 or less.
Medalist 350
Kit Inclusion
You can use different kinds of fuel for welding, cutting, and heating. You can use oxyacetylene, propane gas, propylene, butane, and natural gas. The main feature that makes the Medalist 350 stand out as a Victor gas cutting torch is that any fuel can be used in this kit with the right tip.
If you are after saving some cost, you can use other fuel aside from acetylene, which is a bit expensive.
The Medalist 350 is best for cutting and welding. Its 1-1-101 cutting tip can cut up to 6 inches, while its 2-UM-350 can weld up to 3 inches.
Safety
The different gases will be regulated by the G350-150-540 regulator for acetylene and oxygen and the G350-15-300 fuel gas regulator.
Price
You can buy the Medalist 350 for USD 375 or less.
Medalist 250
Kit Inclusion
You can use propane, natural gas, and acetylene as fuel for the Medalist 250. Like the previous Medalist model, it is to your advantage to use cheaper but still efficient gases if you want to save some cost. Depending on the tip, the Medalist 250 can cut up to 1/2 inch and weld up to 5/64 inch.
Safety
For safety, the Medalist 250 has built-in check valves and G250 Series regulators for gas amount monitoring.
Price
This medium-duty kit costs USD 310 or less.
Contender Edge 2.0
Kit Inclusion
The Contender Edge 2.0 is another go-to tool for your cutting and heating needs. The 1-1-101 tip can cut up to 8 inches, while the 6-MFA nozzle can weld up to 3 inches.
Safety
The ESS3-125-540 regulator is used for oxygen, while the ESS3-15-510 is used for fuel gas. For more safety, the WH315FC torch handle has the Victor technology of flashback arrestors and check valves. The striker and goggles included in the kit are also intended to keep the user safe.
Price
The Contender Edge 2.0 costs around USD 490 or less.
Summary
Victor is one of the most trusted brands for welding, cutting, and heating tools. A Victor cutting torch head and other accessories are all readily available online. You may also get them in retail stores. However, if you are looking for a complete set, check the kits above.
Note that all these Victor kits have years of warranty, so you have the assurance that whichever you will buy, you will have a durable one.
Provided above is each kit's price in case you are looking for the cheapest welding, cutting, and heating tools to add to your workroom.
For you to decide which to buy, check your needs. Do you need tools for cutting, heating, welding, or a comprehensive tool? Check and pick the kit that will satisfy your needs.
July 18, 2022