Are you looking for "cheap" and "high-performance" in the same sentence? We've got your back. The Lotos LTP5000D plasma cutter is under the 500-dollar radar yet is able to cut 1/2-inch steel like it's nothing! Its maximum severance cut is rated up to 3/4 inches.
With those cut capacities in mind, LTP5000D can fully cover all your garage cutting needs unless you're planning to build a metal barge next weekend. Before you run up to the store, it's important to curtail your expectations with this machine. The lower price comes with compromises, as you'll learn more in this review.
Who should get the Lotos LTP5000D pilot arc plasma cutter?
The Lotos LTP5000D is known for its low cost and high cutting power. Lotos can build such a capable machine at such a low cost by using lower quality components than using more costly machines. When comparing the torch handles of a Lotos and a Hypertherm unit, the Hypertherm torch is designed with more convenience, ergonomics, and higher tolerance to harsh use.
The Lotos LTP5000D is an excellent pick for someone who enjoys arts and crafts or ornamental metalwork. Because of its low cost, this is an ideal option for most DIY users looking for a flexible and simple-to-use cutter. This is also a good choice for auto repair, muffler repair, general salvage, and plumbing shops, particularly for those looking for a less costly alternative to higher-end cutters.
- Patented drag-cutting technology (no need to maintain a certain distance from the metal surface while cutting).
- Non-touch pilot arc for an effortless start.
- Dual voltage (110 or 220v).
- Advanced cooling system.
- V-MOSFET transistor.
- Lightweight and easy to carry.
- Capable of cutting a wide variety of surfaces.
- Low-cost and accessible consumables.
- Some may find the 6-foot ground clamp too short for larger projects.
- It doesn't come with an air test button, which could be handy when adjusting the air source.
- It doesn't come with a 110v pigtail.
- Torch trigger doesn't come with a safety guard.
- Customer service is a hit or miss.
Lotos LTP5000D 50amp non touch pilot arc plasma cutter:
Main Features and Benefits
Excellent cutting performance
A V-MOSFET transistor is used in this plasma cutter. This transistor simplifies the process of cutting thin or thick metal or plates. The V-MOSFET transistor provides a steady output for thin metal cutting and high power output for thick metal cutting.
The IGBT high-frequency inverter technology offers an accurate, focused, continuous, and quick cutting process on painted, rugged, and rusted surfaces with minimal slag. Users report a relatively smooth cut with no metal distortion on several surfaces.
The tool easily cuts conductive metals such as aluminum, silver, mild steel, stainless steel, and alloy steel using non-touch pilot arc technology. Since the pilot arc torch does not make physical contact with the metal surface, cutting time is reduced while cutting efficiency and consumable life are improved.
It's not often that you see a heavy-duty metalworking unit with cutting-edge technology like the Papst Advanced Cooling system in a cutter. The plasma cutter uses German cooling technologies to keep the device's internal temperature stable. Regardless of how much work you have to do, the cooling mechanism prevents the plasma cutter from overheating. It also protects the internal elements from dust and debris.
The outer shell of the LTP5000D is made of a heavy metal alloy, which significantly increases the device's versatility and longevity. Even if you use it in a harsh or dusty setting, the metal casing protects the machine's critical components from destruction.
Simple to use
Like all Lotos plasma cutters, this cutter is easy to use and safe to boot. It doesn't take long to put it up together so you can start cutting right away. Set up your project and correctly ground the unit to begin cutting.
The tool is a 50 amp electric inverter air plasma cutter, which ensures it generates direct current effective enough for its rated cutting capacity. It supports automatic dual voltage and frequency switching. It runs on 110 volts at 50 hertz or 220 volts at 60 hertz. To use the 110 volts, though, you may need to buy a pigtail. The dual voltage capability works automatically, so there is no need to do anything, and no modifications to the electrical environment are needed. Install the proper connector, and the unit would choose the proper voltage.
The hose for the plasma torch is 9.5 feet (2.9 meters) long and has a three-pin end attachment. This hose is relatively long, making for excellent extended reach and minimizing the number of times the unit has to be moved closer during the cutting process. The torch also comes with a nozzle, cup, and electrode. The air hose, on the other hand, is easy to put in place. The kit contains two air hose couplers and two air hose clamps for proper attachment to the unit.
Inexpensive and accessible consumables
The consumable starter kit includes a swirl ring, electrode, nozzle, retaining cap, and shield cap. The number of hours spent using them or piercings performed on them determines their lifespan.
The longevity of these consumables is the least of the Lotos' problems due to its drag-cutting design that reduces the possibility of blowbacks and spatter, which helps protect the consumables from any considerable damage.
A one-year warranty backs the LOTOS LTP5000D. However, communication with the warranty department, according to some Lotos LTP5000D plasma cutter reviews, can be a long and complicated procedure at times. So if the plasma cutter fails after a year, you're out of luck. You're best off purchasing a replacement unit because extensive upgrades would almost definitely cost more than a new one.
- Input voltages: 110-220V, 50/60 Hertz
- Input current: 20A at 110-220v
- Output current: 10-50A
- Air supply: Clean, moisture, and oil-free air
- Duty cycle: @ 40° C (104° F) CSA
- 60% at 110V, 50A
- 60% at 220V, 50A
- Dimensions with handles: 12 x 6 x 15 in.
- Weight: 26 pounds/11.8 Kg
- Rated cut: 1/2-inch mild steel
- Severance cut: 3/4-inch mild steel
- Accessories: Torch, air regulator, hose with connections, ground clamp, consumables, Lotos LTP5000D plasma cutter manual
Although it may seem to be identical to other brands of cutters, the Lotos LTP5000D pilot arc plasma cutter is a real workhorse that will deliver on its promises. It is an outstanding choice for rough cutting, including cutting painted or rusted materials and fine cutting. Because of its dual voltage capability, the LTP5000D can be used almost everywhere. With a good air compressor, users can quickly cut a wide variety of metals. The cost is fair for the average home user and small worksites or fab businesses, making it an excellent option for budget-conscious hobbyists.
Consumables are also less costly than certain rivals, and the retailer has a free online video archive demonstrating how to perform different cuts, including gouging. Videos are easy to grasp and can be very helpful to those who are new to using plasma cutters.