Small Garage? Check Out These Entry-Level Plasma Cutter Tables For Small Spaces
Last updated ago
5 min read
By 
Welding Buddy Experts
Published 
July 26, 2022

Small Garage? Check Out These Entry-Level Plasma Cutter Tables For Small Spaces

Last updated ago
5 min read
By 
Welding Buddy Experts
Published 
July 26, 2022
BEST VALUE
BEST CHOICE
PREMIUM PICK

When you're working in a small garage, every inch of space counts. That's why an entry-level plasma cutter table can greatly help. These tables take up very little space, but they still provide the stability and accuracy you need to get the job done. 

We will share our top four plasma tables, ranging from small to smallest. Plus, we will show you which cutting table is our favorite. Let's explore! 

4 Best Plasma Cutter Tables for Cozy Workshops 

Hobbyists with small to no designated workshops make do with whatever space they have. Some use the edge of their welding table. Others might use a deck railing or unused bricks to set up their metal workpieces as makeshift tables. But we know how tiring it can get. 

Below are different small-sized plasma cutter tables, from CNC to portable plasma tables for working with light metal fabrication. 

#1. For the CNC Plasma Newbie: Baileigh 

We'll start with a 2'x2' CNC plasma table from Baileigh. This PT-22 CNC plasma table has bells and whistles, such as user-friendly software and a water bath. With the Baileigh PT-22, you can easily cut complex shapes out of metal and ensure that your cuts will be precise and clean.

Specifications

  • Weight: 550 lbs.
  • Material: Steel 
  • Cutting area: 24" x 24"
  • Cutting speed: 295 in./min.
  • Computer-controlled: Yes
  • Power: 110V
  • Inclusions: Handheld panel, stepper motors with the lead screw, two different torch holders, water bath, BobCAD-Cam Express Software
  • Warranty: 1 year
  • Price: $7,799.00

Highlights

  • Fully-assembled. You don't need to spend hours building this CNC plasma cutter table as it's already assembled upon arrival. Plus, since they're enclosed, you wouldn't see any loose wirings and electronics. 
  • Handheld control panel: If you want to create your cuts, you can simply dial your X and Y coordinates with the panel.
  • Portable. This hefty CNC plasma table is movable through its 5" caster wheels with stoppers. Thus, you can move around your workshop easily. 
  • Fully-welded steel frame. With this feature, the Baileigh table will not warp due to overexposure to heat. 
  • Lifetime technical support. You can contact their support by phone if you need help setting up or troubleshooting this CNC plasma table. 

Lowlight

  • At $7,799.00, the price of the Baleigh CNC table might be too steep for hobbyists who just started or only have occasional projects.

#2. For a Tech-Savy CNC User: Langmuir Systems

Langmuir Systems CNC Plasma Cutter

If you're into techie plasma cutting, you will enjoy this industrial-grade plasma table from Langmuir Systems. Aside from its control software, the Crossfire CNC Plasma has CAD design software that lets you create intricate cuts of different patterns and even movie characters. 

Specifications

  • Table load capacity:  1" steel plate
  • Weight: 130 Pounds
  • Material: Steel 
  • Cutting area: 25.3" x 23.3"
  • Cutting speed: 300 in./min.
  • Computer-controlled: Yes
  • Power: 110/220 VAC
  • Inclusions: FireControl CNC Control Software, Two-axis CNC plasma cutting machine, NEMA 23 stepper motors, CrossFire Gen2 electronics, Autodesk Fusion 360 CAD Design Software, CAM Toolpath Generation Software
  • Warranty: 1-year factory 
  • Price: $1,495.00

Highlights

  • Unlimited access to ready-to-cut templates. You can select ready-made designs from their online library and load them to your plasma table.
  • Powerful control software. FireControl is Langmuir's software with robust features such as patterning, straight cut, and pierce delay override that lets you maximize your workpiece. It's compatible with Windows 7/MacOS 10.13 and above. 
  • Minimal appearance. The table is painted matte black and has discreet electronics, making this plasma table look seamless. 
  • Portable. It has caster wheels so you can roll and store it away when unused. 
  • Affordable CNC plasma table. With its software and wide cutting area, this high-tech table only costs one-fifth of Baileigh's price. 

Lowlight

  • You need a helping hand and at least eight hours to assemble this plasma cutter table. Also, there's a steep learning curve when assembling and setting up the software. 

#3. For the Low-Tech Ergonomist: Eastwood

Many of you might already have plasma cutter consumables and a heavy-duty plasma cutter with an air compressor. And you don't need fancy computers to do your job. Instead, you want a permanent place to do your metal fabrication. 

We highly recommend this plasma cutting table from Eastwood for hobbyists who just want an average table for plasma cutting. 

Specifications

  • Weight: 130 Pounds
  • Material: Carbon steel 
  • Cutting area: 32" x 21"
  • Computer-controlled: No
  • Inclusions: None.
  • Warranty: 1 year 
  • Price: $311.99

Highlights

  • Comfortable working height. Unlike concrete shop floors or railings, this 30-inch high table lets you work at a comfortable standing position so you can make precise cuts without hurting your back. 
  • Replaceable table slats. You don't need to buy a new cutting table after your slats are burnt up. This is because you can easily remove and replace them with brand-new slats that you can purchase from Eastwood. 
  • Support heavy metals. The dimensions seem like it's a flimsy working table. But it can handle up to 250 lbs of metal. Thus, you cut metal sheets without having to pre-cut them beforehand. 

Lowlight

  • There's no water bath to reduce the sparks and debris from cutting, so there's a tendency to have accidental fires. Therefore, it's recommended that you use this plasma table outdoors. 

#4. For the Nomadic Hobbyist: 911 Motorsports

Plasma cutting on a plasma table

Do you have projects that need cutting on-site? Or do you need an incredibly small plasma table for your garage that can catch all the sparks and debris? Introducing the portable water table from 911 Motorsports.  

Specifications

  • Material: Steel 
  • Cutting area: 21"
  • Computer-controlled: No
  • Inclusions: Stencil clamp with an extended arm
  • Warranty: None
  • Price: $262.95

Highlights

  • Super lightweight. This water table is the size of a huge basin that can fit into any workshop or the back of your car for on-call projects.
  • Holds stencils in place. It comes with a quick-release clamp that goes around the plasma table. Thus, you don't need to purchase clamps to hold your straight edge or stencils anymore. 
  • 360 working position. This allows you to work on any angle without table edges hindering your cutting. Plus, you can cut your metal without moving it. 
  • Economical yet effective. It's highly durable and does the job for $263. 
  • DIY assembly. If you don't like cutting metals in a crouching position, you can create a stand supporting this plasma cutter table. 

Lowlight

  • The water tub is sold separately, but you can easily buy a 17-gallon tub from Behrens or a standard 55-gallon drum from your local hardware. 

Our Pick: Langmuir Ignited Affordable CNC Milling

Plasma cutter tables are a great investment for any small business or garage workshop. They provide a stable, sturdy surface to work on and make the plasma cutting process easier and more accurate. The four plasma cutter tables above are great for small spaces. 

If you're looking for an affordable option that doesn't sacrifice quality, we recommend Langmuir Systems. It offers all the advanced features and software you need in a plasma cutter table without breaking the bank. 

Whatever tool or accessory you need, Welding Buddy is here to help you find the right one. Explore Welding Buddy for more amazing plasma cutter and welding buying guides!

You might also like
Inspiring and educating the current and next generation of welders.

Subscribe to our newsletter

Be first to know about specials! Our newsletter will keep you up to date on everything welding. Join our mailing list.

Subscribe to our newsletter!

Be first to know about specials!
Join our mailing list.
crossmenuchevron-downarrow-up-circle